Trying to id this spoon maker

PHOTOS REQUIRED - marks + item
Post Reply
juantotree
contributor
Posts: 406
Joined: Wed Aug 12, 2015 12:17 pm

Trying to id this spoon maker

Post by juantotree »

Hi,

This bottom marked table spoon with an indistinct date letter, has a makers mark I am struggling to identify. Does anybody have any ideas, or is it one of the lost register marks?

Many Thanks

Martin

Image
Image
Image
dognose
Site Admin
Posts: 61681
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Trying to id this spoon maker

Post by dognose »

Hi Martin,

That to me, looks like a very nice Exeter spoon.

Sorry, I can't help with the maker but I'll move it to the Exeter section to see if we have any luck there.

Trev.
juantotree
contributor
Posts: 406
Joined: Wed Aug 12, 2015 12:17 pm

Re: Trying to id this spoon maker

Post by juantotree »

Hi Trev,

Of course you are correct, what I mistook for a date mark is definitely a rubbed Exeter Town Mark, now I just need to track down the maker.

Martin
silvermakersmarks
co-admin
Posts: 1794
Joined: Tue Apr 09, 2013 9:22 am
Location: Hertfordshire, UK
Contact:

Re: Trying to id this spoon maker

Post by silvermakersmarks »

This is a mark of Richard Freeman of Plymouth who was working from 1702 to 1753. There is no obvious date letter but it must be later than 1720 as the spoon is sterling standard rather than Britannia standard.

Phil
juantotree
contributor
Posts: 406
Joined: Wed Aug 12, 2015 12:17 pm

Re: Trying to id this spoon maker

Post by juantotree »

Thanks Phil, I haven't seen this mark of Freeman's before. There are initials and a date of 1743 engraved to the terminal which would seem to fit nicely with the age of the spoon.

Martin
Granmaa
co-admin
Posts: 1734
Joined: Sun Apr 09, 2006 9:32 am
Location: London
Contact:

Re: Trying to id this spoon maker

Post by Granmaa »

It looks like one of those cases where a Hanoverian spoon has had the stem cut and resoldered the other way round to make it Old English pattern. The stem seems to have some file marks around where the date letter should be.

Miles
juantotree
contributor
Posts: 406
Joined: Wed Aug 12, 2015 12:17 pm

Re: Trying to id this spoon maker

Post by juantotree »

Hi Miles, after further inspection I think you are absolutely right, well spotted.

Martin
Post Reply

Return to “Exeter Hallmarks”